1303 Mythbuster -> 2,4 ltr T4Turbo

Présentation de vos projets, les évolutions, les modifs...
Répondre
Avatar du membre
coxy-ben
Membres confirmés
Messages : 2428
Enregistré le : 28 sept. 2007, 06:13
Votre German : 1302 berline
Moteur : 1915cc T1
Localisation : ardennes

Re: 1303 'Versuchsfahrzeug'

Message par coxy-ben »

yeah !

great result !!! :cheers:
Avatar du membre
prototix
Membres confirmés
Messages : 2970
Enregistré le : 03 oct. 2007, 11:39
Votre German : 1200 1969
1303 1974
Moteur : T4 1910cc
T4 2366cc
Localisation : belgique

Re: 1303 'Versuchsfahrzeug'

Message par prototix »

tres bon :thumb:
Avatar du membre
Superflo
Membres confirmés
Messages : 2641
Enregistré le : 01 oct. 2007, 20:55
Votre German : 1303 de 75 evo8
Moteur : 2806cc T4 EFI
Localisation : 01 et 94

Re: 1303 'Versuchsfahrzeug'

Message par Superflo »

Good results!

What camshaft, heads, CR, ... do you run?
Avatar du membre
Airspeed
Membres confirmés
Messages : 324
Enregistré le : 21 oct. 2007, 22:34
Votre German : '75 1303 sunroof
Moteur : 2,4 T4T
Localisation : Pays-bas
Contact :

Re: 1303 'Versuchsfahrzeug'

Message par Airspeed »

Superflo a écrit : What camshaft, heads, CR, ... do you run?
Original, original et...original :wink: (original de 914 2.0)

Qui a dit c'est ne pas possible de turbo un type 4?? :roll:
Avatar du membre
Superflo
Membres confirmés
Messages : 2641
Enregistré le : 01 oct. 2007, 20:55
Votre German : 1303 de 75 evo8
Moteur : 2806cc T4 EFI
Localisation : 01 et 94

Re: 1303 'Versuchsfahrzeug'

Message par Superflo »

Very interesting, stock parts and good torque/power
How much boost can handle a stock T4 with your setup?
Avatar du membre
Airspeed
Membres confirmés
Messages : 324
Enregistré le : 21 oct. 2007, 22:34
Votre German : '75 1303 sunroof
Moteur : 2,4 T4T
Localisation : Pays-bas
Contact :

Re: 1303 'Versuchsfahrzeug'

Message par Airspeed »

Superflo a écrit :Very interesting, stock parts and good torque/power
How much boost can handle a stock T4 with your setup?
Yes, that IS interesting huh? Funny how rumours of things 'that can't be done' live on for decades... I must have busted a dozen of those myths by now...

Good question how much boost a stock engine can handle and can't answer that yet, but I am about to find out :wink:

I did accidently block the wastegate last saturday evening before the meeting (several times..), trying to control boost with the ecu and had a highest reading in the datalog of 1.3 bar turbopressure... :shock: Acceleration in second gear between 0.5 and 1 bar boost is scary!
Engine still lives on apperently and without any leaks, but that high pressure was only very briefly. I think (..) 0.7 bar boost would be safe for everyday use or maybe trackday use. 0.5 bar obviously is very safe as the engine didn't even get 1 Celcius warmer, not even on head temperatures.
I will run 1 bar for dragracing (EBI-2?) and dynoday though. At least that is my plan.
Avatar du membre
fullpower
Membres confirmés
Messages : 602
Enregistré le : 09 oct. 2007, 21:23
Votre German : 1300 german
Moteur : t4 2366
Localisation : ardennes

Re: 1303 'Versuchsfahrzeug'

Message par fullpower »

Ouais et en frenchy ca donne quoi les amis car ca à l'air intéressant tout ça :thumb: :thumb:
Avatar du membre
kevin
Membres confirmés
Messages : 483
Enregistré le : 20 oct. 2007, 08:39
Votre German : Cab 1303
Moteur : 1970cc T4, 2366cc T4, 2733cc T4 en cours
Localisation : Walhain-Saint-Paul (Belgique)
Contact :

Re: 1303 'Versuchsfahrzeug'

Message par kevin »

Hi Walter,
Thanks for the Saco pict.

Thanks to Benoit Roman who gave me the video....

... enjoy "Airspeed at budel"

http://www.youtube.com/watch?v=H-blqkMS2SA

Congratulation :thumb:

Kev
Avatar du membre
Airspeed
Membres confirmés
Messages : 324
Enregistré le : 21 oct. 2007, 22:34
Votre German : '75 1303 sunroof
Moteur : 2,4 T4T
Localisation : Pays-bas
Contact :

Re: 1303 'Versuchsfahrzeug'

Message par Airspeed »

merci Kevin, tres chic!

Today I did a test run with the adjusted fuel pressure and 1.0/0.95 bar boost pressure: 212,5 km/u in 5th gear and 5200 rpm! I did let go just over 200 km/h, but more speed would have been very possible.

Its amazing at how it accelerates now!
Temps: At over 200 km/u: Head temp: 355F, Oil temp 85 C and IAT 33 Celcius... I think thats durable power 8)
Avatar du membre
KamperRS
Membres confirmés
Messages : 54
Enregistré le : 27 sept. 2007, 20:28
Localisation : Montpellier / Nurburgring
Contact :

Re: 1303 'Versuchsfahrzeug'

Message par KamperRS »

Very nice job ! Is your Safeguard linked to the ecu ? or did it work standalone ? where dit you put the knock sensor ?
I know this is a lot of questions at the same time , but i ran an engine similar to yours and you seem to set it up faster than me . . . :scratch:
Avatar du membre
Airspeed
Membres confirmés
Messages : 324
Enregistré le : 21 oct. 2007, 22:34
Votre German : '75 1303 sunroof
Moteur : 2,4 T4T
Localisation : Pays-bas
Contact :

Re: 1303 'Versuchsfahrzeug'

Message par Airspeed »

KamperRS a écrit :Very nice job ! Is your Safeguard linked to the ecu ? or did it work standalone?
The Safeguard is a stand-alone unit. It is switched in between the spark signal that the ecu wants to give and the DIS coil. Its actually pretty simple with regarding to wiring it up. But no worries, the Safeguard comes with a schematic how to hook it up if you have a ecu and DIS :wink:
If you also want one for use with an ecu that also controls spark, better not order it through aircooled.net as they send you the wrong one...ask me how I know...Best to contact Jack Rizzo from J&S directly and get a 'Vampire' unit. That is the latest one specifically for ecu+DIS (which I also have) :wink:
where did you put the knock sensor ?
The knock sensor itself (a regular Bosch unit) is now installed on one of the engine case half bolts. I used the one where you usually put the bell-crank linkage onto. It doesn't really matter that much where you put it on the case with the safeguard as long as it is solidly mounted. The bell-crank part of the engine case seems favourable.
I know this is a lot of questions at the same time , but i ran an engine similar to yours and you seem to set it up faster than me . . . :scratch:
No worries, if you have specific technical questions, I'll always am happy to share my findings.

CU @ EBI again?
Regards,
Walter
Avatar du membre
Airspeed
Membres confirmés
Messages : 324
Enregistré le : 21 oct. 2007, 22:34
Votre German : '75 1303 sunroof
Moteur : 2,4 T4T
Localisation : Pays-bas
Contact :

Re: 1303 'Versuchsfahrzeug'

Message par Airspeed »

Audjourdhui 'Dyno-day' pour le 2.0 @ 1 bar boost :mrgreen:

Photo avant departure:
Image

Le disque avant: 330x28mm:
Image

This time at a 'real' rolling road dyno (same as I tested the 2,7 ltr on).

We put a fan on the intercooler for obvious reasons:
Image

Checking inlet temps recorded by the ecu, but all was well (28 C):
Image

The results: 222 FWHP at 5350 tpm and 305 Nm (225 lbs.ft) @ 4750 tpm (left scale) :shock:
195.0 RearWheel HP (right scale). That is both MORE than the 2,7 ltr (191,5 RWHP and 270Nm or 200 lbs.ft) made!! :shock:
The 2,7 had a bit more torque down low, but even so 30Nm (25 lbs.ft) more is quite a bit...
Image

To say I am happy with the result is an understatement, but I am also very amazed I must confess..
"c'est ne pas possible de turbo un type 4"
Myth busted :wink:
Avatar du membre
Superflo
Membres confirmés
Messages : 2641
Enregistré le : 01 oct. 2007, 20:55
Votre German : 1303 de 75 evo8
Moteur : 2806cc T4 EFI
Localisation : 01 et 94

Re: 1303 'Versuchsfahrzeug'

Message par Superflo »

Congratulations for the nice results!

Will you race it at EBI2?

What cluth setup and flywheel bolts are you running ?
Avatar du membre
germanbuilder
Membres confirmés
Messages : 564
Enregistré le : 27 sept. 2007, 20:27
Localisation : Tenerife

Re: 1303 'Versuchsfahrzeug'

Message par germanbuilder »

huhuhuuuuuuuu 8) 8) 8) 8)
Avatar du membre
Benoit
Admin
Messages : 6039
Enregistré le : 14 sept. 2007, 00:21
Votre German : Cox 1200 de 74
Bay Window de 78
Moteur : Combi EJ25. Cox EJ20G
Localisation : 74

Re: 1303 'Versuchsfahrzeug'

Message par Benoit »

I like it' :thumb:
Répondre

Qui est en ligne

Utilisateurs parcourant ce forum : Semrush [Bot] et 46 invités