1303 Mythbuster -> 2,4 ltr T4Turbo

[Airspeed]

So the compression ratio is already settled for turbo or you'll have to change it ?

No changing of compression ratio anymore, c'est ca!

[Airspeed]

Some new tires (drag radials from M &H) for drag racing:



and finally finished the case breathing system with nice AN10 lines:

[Airspeed]

Un petit amélioration de suspension avant
Cést un partie de MBT, allemagne.

[ElPax]

Nice part and a triangle is born.
For the big braking it's perfect.

[Airspeed]

After the N/A dynotime (189 Cv a 7300 RPM), I've started building the turbo header:

[cheap speed]

marvelous!!!!!!!!!!!!!!!!!!!!!!

[Superflo]

What's your piping diameter?

[Airspeed]

Inner diameter = 39mm
Outer diameter = 42mm (1,5mm wall thickness)

For turbo and fast spool, I would have liked it even a little bit smaller (38mm inner), but this size was more readily available..

Lots of people go too big on diameter with turbo. Its not neccesary and only gives slower spool-up.

[bill77]

What's new on your project since last year ?

[ElPax]

Il y a de la vie par ici !
There's life here !

[bill77]

Mais oui !
Il y a même un sacré paquet de canassons par là !!!
Heureux pour lui que le projet prenne vie !

[ElPax]

[prototix]

Pas mal du tout

[Alex]

coool
Mais in the inside video, le mur est vraiment proche!! faut pas se louper

[ElPax]