
Just a quick summary of my project so far and my current plans!
Before it came off the road:
I had fitted 996 brakes on all corners and also kerscher front struts with the cup 2 wheels
I then found some serious rust so it is now off the road for a BIG overhaul!
Inside the heater channels, same both sides!
I am also going to use a short nose G50 transmission
It has only done about 30k km and I also have an LSD to go in it.
Engine will be a WRX RA with VOS chip so about 300bhp, I had it in the car temporarily on the AT transmission:
I was originally thinking about modifying the dash for the subaru instruments, but now I am considering using the complete subaru dashboard complete with heating and air conditioning, also moving the steering column so it is less off-centre
I also have some 996 sports seats:

For now I am concentrating on fixing the rust, but after that I will work on the chassis. I would need to do some serious modifications to fit a G50 so I am considering building a new chassis with 996 suspension on front and rear! Alternatively either 996 rear suspension on bug chassis or finally work with what I have and make new framehorns and strengthen all the rear end up as I would have to cut the middle from the torsion bar housing.
Let me know what you think!
Rich